GENERAL INSTALLATION & OPERATION INSTRUCTIONS

IMPORTANT SAFEGUARDS:

1.To ensure the success of the installation, be sure to read the instructions and review the diagrams thoroughly before beginning.

2.To avoid possible electric shock, be sure electricity is turned off at the main power box before wiring. All electrical connections must be made in accordance with local codes, ordinances and/or the National Electric Code. If you are unfamiliar with the methods of installing electrical wiring and products, secure the services of a qualified and licensed electrician as well as someone who can check the strength of the supportive ceiling members and make the proper installation(s) and connections.

3.Make sure that your installation site will not allow rotating fan blades to come in contact with any object. Blades should be at least 7 feet from floor when fan is operating.

4.If possible, mount ceiling fan on a ceiling joist - the joist must be able to support the motion and weight of the moving fan. If the fan will be mounted on a ceiling outlet box, an approved box UL listed as “suitable for fan support” is required. The box and its supporting members must be able to support the moving weight of the fan (at least 35lbs.). The box must not be able to twist or work loose. Installation on a concrete ceiling should be performed by qualified personnel.

5.Blades should be attached after motor housing is hung and in place. Fan motor housing should be kept in the carton until ready to be installed to protect its finish. If you are installing more than one ceiling fan, make sure that you do not mix fan blade sets, as each blade is part of a weighted set.

6.After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the common conductor and the grounding conductor on one side of the outlet box, and the “HOT” wires on the other side.

7.Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL listed and should be installed per the light kit’s installation instructions.

8.After fan is completely installed, check to make sure that all connections are secure to prevent fan from falling and/or causing damage or injury.

9.The fan can be made to work immediately after installation - the bearings are adequately charged with grease so that, under normal conditions, further lubrication should not be necessary for the life of the fan.

10.The fan should be turned off and allowed to stop rotating before reversing fan direction.

11.When inserting bulbs, do not exceed the 300-watt maximum. The upper lighting fixture uses four 25-watt bulbs, leaving the remaining 200 watts for the optional lower light kit.

1

Page 2
Image 2
Regency Regatta owner manual General Installation & Operation Instructions, Important Safeguards

Regatta specifications

The Regency Regatta is a premier annual event that showcases the passion for rowing and sailing in a picturesque setting. Hosted in a vibrant locale, it draws participants and spectators from various backgrounds, all united by their love for water sports. This regatta symbolizes not just competition but also camaraderie and a celebration of maritime culture.

One of the main features of the Regency Regatta is its diverse range of events, accommodating various categories of boats and skill levels. From elite rowing teams to novice sailors, the regatta embraces inclusivity, encouraging participation from individuals of all ages. The event typically spans several days, with races scheduled for different classes, allowing for a full display of athletic prowess and strategy on the water.

Safety and technology play vital roles in the modern iteration of the Regency Regatta. Advanced timing systems and GPS tracking ensure accurate race results and provide spectators with real-time updates on each team's performance. Drones equipped with high-definition cameras capture stunning aerial views of the races, enhancing the viewing experience on-site and for virtual audiences. These technologies not only improve the efficiency of the event but also add an innovative twist to traditional racing.

Another characteristic that sets the Regency Regatta apart is its commitment to sustainability. Organizers implement environmentally friendly practices, such as waste reduction initiatives and promoting the use of eco-friendly materials for event facilities. Additionally, many participating teams are encouraged to adopt green technologies in their boats, emphasizing the importance of preserving aquatic environments.

The spirit of community is alive at the Regency Regatta, where local vendors often set up stalls offering delicious food and beverages. This creates a festival atmosphere where attendees can mingle and relax between races, fostering connections and friendships.

In conclusion, the Regency Regatta is more than just a series of races; it is a celebration of athleticism, technology, and community. With its broad range of events, commitment to safety, and focus on environmental responsibility, it continues to be a beloved tradition for rowers, sailors, and fans alike. The regatta exemplifies the joys of competition and the beauty of aquatic sports, making it a highlight on the annual sporting calendar.