Safety Precautions
G 018
6.Power fasteners are a permanently installed fixture. An act of demolition is required for their removal. Appropriate safety precautions must be taken.
Head
Shank
Plastic Flute |
7.NEVER use common nails or other materials as fasteners. Remington® Power Fasteners are manufactured from special steel and heat treated to produce a very hard yet ductile fastener.
G 018
8.NEVER pry a powder load out of the chamber. Prying can discharge the load causing serious injury (see Trouble- shooting Guide on pages 20 and 21).
| LOAD |
| UNLOAD |
1 | 2 | 2 | 1 |
| REMINGTON |
| REMINGTON |
|
| ||
|
|
|
9.ALWAYS insert the power fastener first, then the powder load. If work is interrupted for any reason, ALWAYS remove the powder load before removing the power fastener (see page 15, item 7).
101274 | 11 |
