Remington 490, 489 operating instructions Other types of loads will cause load-ejection problems

Troubleshooting Guide

PROBLEM		POSSIBLE	REMEDY
		CAUSE
Tool does	not	Dirt build-up on	Check firing pin indenta-
fire.		breech not allow-	tion on cartridge. Clean
		ing proper penetra-	breech, breech face, sear
		tion of firing pin.	and firing pin. Replace
			worn or damaged parts.
Opening	and	Lack of proper	Inspect and clean com-
closing of barrel		cleaning.	plete tool. Replace worn
orpushingdown			or damaged parts.
on the tool, etc.
isnotsmoothbut
isroughorbinds.

Fasteners

SP

SPW

SP FASTENERS

482-79
Wood or Non-Metals	Wood or Non-Metals
To Steel	To Concrete

Fasten wood or non-metals to concrete or steel.

IMPORTANT

This tool is designed to use .22 caliber neck-down crimped loads, power levels 1 (gray) through 4 (yellow).

5/8"

G 018

Neck-Down Crimped Load Straight Wadded Load

CAUTION: Do not use any load other than the .22 caliber neck-down crimped load.

Other types of loads will cause load-ejection problems.

101274 21