Operating Your Trimmer
Charging/Recharging
To recharge use only the charging adapter provided.
■Turn the trimmer OFF. Insert the adapter plug into the jack, then plug the adapter into an electrical outlet. The charging indicator will glow green, indicating the unit is charging. A full charge will take
■Your trimmer cannot be overcharged. You may leave it plugged in between uses. However, if the trimmer is not going to be used for an extended period (2 weeks), unplug the unit and recharge when resuming use.
■Charge the trimmer at temperatures between
■In order to preserve the life of the batteries, they they should be charged for 24 hours.
Corded Rechargeable
Operation
The
Hair Length Selector and
Removable Trimmer Guard
Attachment
NOTE: Trimmer guard must be attached to the trimmer in order to use the hair length selector.
The hair length selector and trimmer guard attachment ensures precise trimming and has nine adjustable positions:
Setting | Beard Style | Length |
1 | Stubble look | 1.5 mm - 0.06" |
2 |
| 2.5 mm - 0.1" |
3 | Short | 4 mm - 0.16" |
4 |
| 5.5 mm - 0.22" |
5 | Medium | 7 mm - 0.28" |
6 |
| 9 mm - 0.35" |
7 |
| 11 mm - 0.43" |
8 | Long | 14 mm - 0.55" |
9 |
| 18 mm - 0.71" |
■To adjust, roll the “Zoom Wheel” toward the top of the trimmer to adjust for longer length, and toward the bottom of the trimmer for shorter length. The wheel will click into one of nine positions.
■Begin trimming at one of the longest settings (#8 or #9) to avoid accidentally trimming hair too short. As you become familiar with the settings, you can then select your desired length setting.
Trimmer Guard Attachment
Remove trimmer guard attachment if you are defining hairline edges such as sideburns, trimming the nape of your neck, trimming your beard line on front of neck, or if you want to clean the cutter assembly.
To remove:
■Be sure the trimmer is in the OFF position.
■While holding trimmer in one hand and holding the “Zoom Wheel” to prevent it from turning, gently pull the trimmer guard attachment away from the
trimmer. The guard can be removed and replaced on any setting.
To replace:
■Be certain trimmer is in OFF position.
■While holding the trimmer in one hand, and holding the “Zoom Wheel” to prevent it from turning, slide the guard over the top of the trimmer until it clicks into position.
NOTE: The trimmer guard attachment can only be placed on the trimmer one way; if it does not fit properly, remove and reverse it.
6 |
| 7 |
|
|
|
