How to Use, Charging the PG-250, Attachments

CS27505_pg250_IB 8/31/05 5:08 PM Page 6

How to Use

Before using the PG-250 for the first time, it must charge for 14-16 hours.

1.Make sure the groomer is turned off.

2.Connect the cord to the charging base, then into an electrical outlet.

3.Set the groomer into its spot in the charging stand. A green light will come on, indicating the unit is charging.

NOTE: Charge adapter may be plugged directly into the bottom of the groomer or attached underneath the stand.

■Charging should be done at tempera- tures between 40° and 95°F, or it could decrease the battery’s life.

■In order to preserve the life of the batteries, they should be fully dis- charged every six months and then fully charged for 24 hours.

■If the unit is not going to be used for an extended period of time (2-3 weeks) unplug it and fully recharge when you want to use it again.

■Remington rechargeable groomers are designed only for cordless operation.

■Remington rechargeable groomers are powered by Nickel–Cadmium batteries (see battery removal section for proper disposal of batteries)

■To attach: Set the attachment onto the open end of the groomer, and turn it so the solid arrow aligns with the solid circle.

■To remove: Turn the attachment so the open arrow aligns with the open circle, and pull it off.

5- Medium

■To attach: Align the side rails in the comb with the slots on the sides of the trimmer attachment then side on the comb until it snaps into place.

■To remove: Push at the back of the comb and slide off the trimmer.

6		7