| OWNER’S MANUAL |
TROUBLE |
|
SHOOTING |
|
PROBLEM | SOLUTION |
Saw operates but does not cut. | Saw chain is assembled backwards. See manual for correct assembly. |
|
|
Saw does not cut unless heavily forced. Chips are fine, | Dull saw chain. See manual. |
dust like. |
|
|
|
Saw seems to run slow and easily stalled.
Low supply voltage. Check extension cord size noted in the manual. Low voltage can cause poor performance and motor burnout.
Saw does not operate when trigger switch is squeezed. | Lock out button has not been depressed to release trigger. OR, extension cord |
| connections are loose. OR, line fuse or circuit breaker is open. OR, motor |
| brushes need replacement. See your service center. OR, wiring circuit open, |
| See your service center. |
|
|
Saw runs but chain does not move. | Gear train failure. See your service center. |
|
|
Chain does not get oil. | Oil slot in bar or mount is clogged with saw dust. Remove and clean. OR, oil |
| is not thin enough. See manual. |
|
|
Saw chain comes off guide bar.
Chain is too loose and requires adjustment. See manual. Or, bar and chain are not assembled properly. See manual, recheck assembly.
Saw smokes. | DO NOT operate. See your service center |
|
|
Saw leaks oil. | Oil cap is not secure. Note: when storing, empty oil tank to avoid seepage. |
|
|
101755 | 11 |
