Renesas M16C/62P Group

Rev.1.00 2007.11.1

REC10B0002-0100

RAPI_AN21 Uses AN21 pin for the analog input pin.

Selectable only when one-shot mode or repeat mode is used.

RAPI_AN22 Uses AN22 pin for the analog input pin.

Selectable only when one-shot mode or repeat mode is used.

RAPI_AN23 Uses AN23 pin for the analog input pin.

Selectable only when one-shot mode or repeat mode is used.

RAPI_AN24 Uses AN24 pin for the analog input pin.

Selectable only when one-shot mode or repeat mode is used.

RAPI_AN25 Uses AN25 pin for the analog input pin.

Selectable only when one-shot mode or repeat mode is used.

RAPI_AN26 Uses AN26 pin for the analog input pin.

Selectable only when one-shot mode or repeat mode is used.

RAPI_AN27 Uses AN27 pin for the analog input pin.

Selectable only when one-shot mode or repeat mode is used.

RAPI_ANEX0 Uses ANEX0 pin for the analog input pin.

Selectable only when one-shot mode or repeat mode is used.

RAPI_ANEX1 Uses ANEX1 pin for the analog input pin.

Selectable only when one-shot mode or repeat mode is used.

RAPI_P0_GROUP Uses port P0 group for the analog input pin. Selectable only when

sweep mode, repeat sweep mode 0, or repeat sweep mode 1 is used.

RAPI_P10_GROUP Uses port P10 group for the analog input pin. Selectable only when

sweep mode, repeat sweep mode 0, or repeat sweep mode 1 is used.

RAPI_P2_GROUP Uses port P2 group for the analog input pin. Selectable only when

sweep mode, repeat sweep mode 0, or repeat sweep mode 1 is used.

RAPI_AD_ON Sets the A/D converter to start operating.

RAPI_AD_OFF Sets the A/D converter to stop operating.

[data2]

The set value differs with the A/D conversion mode used.

One-shot mode Specify 1.

Repeat mode

Single sweep mode Specify 2, 4, 6, or 8.

Repeat sweep mode 0

Repeat sweep mode 1 Specify 1, 2, 3, or 4.

Return value

If A/D converter was successfully controlled, RAPI_TRUE is returned; if failed,

RAPI_FALSE is returned.

Functionality A/D converter

Reference __CreateADC, __DestroyADC, __GetADC, __GetADCAll

Remark •

If an undefined value is specified in the first argument, operation of the API cannot

be guaranteed.