Renesas M30220TF-PRB Chapter 2. Preparation

( 14 / 54 )

Chapter 2. Preparation

2.1 Package Components

This product consists of the following items. When unpacking, check to see if your product package

contains all of these items.

Table 2.1 Package components

Please keep the M30220TF-PRB's packing box and cushion material in your place for reuse at a later

time when sending your product for repair or other purposes. Always use these packing box and

cushion material when transporting the M30220TF-PRB.

If any of these items are missing or found faulty, please contact your local distributor. Also, if there

is any question or doubt about the packaged product, contact your local distributor.

2.2 Other Tool Products Required for Development

To bring forward programs development on the M30220 and M30221 Group MCUs, the products

listed below are necessary in addition to the package components listed above. Get them separately.

Table 2.2 Other tool products

To purchase these products, contact your nearest distributer.

Emulator main unit

Emulation pod main unit

Emulator debugger

Converter board

PC4701

M30200T-RPD-E

M3T-PD30 Ver.4.00 or later

For 144-pin LQFP (144P6Q-A): FLX-144NSD

For 144-pin TQFP (144PFB-A): FLX-144NSE

For 120-pin LQFP (120P6R-A): FLX-120NSE

The converter board which matches to the foot pattern of the target

system is required.

Item

M30220TF-PRB pod probe for flash memory rewrite mode debug of M30220 and M30221

Group MCUs

Screws for fixing pod probe

Floppy disk (custom program file)

M30220TF-PRB User's Manual (this manual)

M30220TF-PRB User's Manual (Japanese)

M30220TF-PRB Repair Request Sheet (English/Japanese)

Quantity

2

1

1

1

1

1

Contents

Main ( 2 / 54 ) Preface To use the product properly Precautions for Safety: Contents Page Terminology Page Chapter 1. Precautions for Safety WARNING IMPORTANT CAUTION Note on Final Evaluation: Note on Differences between Actual MCU and Emulator: Note on Clock Supply to the MCU: Notes on NMI* Input: Notes on Interrupts: Notes on DMA Transfer: Notes on Referencing and Setting the Work Area: Note on Reading SFR Area: Note on Instructions that Access the Single-step Interrupt Vector Area: Notes on MAP References and Settings: Note on CPU Rewrite Mode: Page Page Chapter 2. Preparation 2.1 Package Components 2.2 Other Tool Products Required for Development 2.3 System Configuration Page Page Chapter 3. Setting Up 3.1 Switch Settings Note on CNVSS: 3.2 A-D Conversion Bypass Capacitor Note on the Operation of A-D Converter: When Connecting Pod Probe: 3.3 Connecting the M30200T-RPD-E Page Page Page Page 3.5 Procedure for Making an MCU File for M3T-PD30 Page Chapter 4. Debugging Procedure for CPU Rewrite Mode 4.1 Outline of Debugging Procedure 4.2 Using Custom Commands dbg_reset and fmcr1set (1) Custom Command dbg_reset (2) Custom Command fmcr1set Page 4.3 Debugging Procedure (1) Debugging Procedure for CPU Rewrite Mode (Microcomputer Mode) Figure 4.2 Memory map when debugging in microcomputer mode Page (2) Debugging Procedure for CPU Rewrite Mode (Boot Mode) Figure 4.3 Memory map when debugging in boot mode Page 4.4 How to Access Flash Memory Area (1) Using Script Commands (2) Using the Dump Window (3) Using the RAM Monitor Window 4.5 Precautions for CPU Rewrite Mode Note on Custom Command dbg_reset: Note on CNVSS: Note on Boot Mode: Notes on Setting Software Breaks: Note on RESET from the Target System: Note on Setting the CPU Rewrite Mode Select Bit: Note on Address FFFE0h - FFFFFh: Note on Changing the Mode of Flash Memory: Page Page Page Chapter 5. Specifications 5.1 Specifications Table 5.1 lists the specifications of the M30220TF-PRB. Table 5.1 Specifications of the M30220TF-PRB 5.2 External Dimensions Page Page Chapter 6. Troubleshooting 6.1 When the Emulator Debugger Does Not Start Up Properly (1) When the LED Display of PC4701 is Abnormal Table 6.1 LED's abnormal display and its checkpoints See the PC4701 User's Manual. (2) Errors Occur When Starting Up the Emulator Debugger (When the target system is connected) Table 6.2 Checkpoints of errors when starting up the emulator debugger (target is connected) See the user's manuals of the PC4701 and emulator debugger. See the user's manual of the emulator debugger. See "3.3 Connecting the M30200T-RPD-E" (page 21). 6.2 Operation Differs from That of Actual MCUs Page Chapter 7. Maintenance and Guarantee 7.1 Maintenance 7.2 Guarantee 7.3 Repair Provisions 7.4 How to Request for Repair Note on Transporting the Product: