( 28 / 58 )
(3) Replacing the Oscillator Circuit Boards
Figure 3.7 shows how to replace the oscillator circuit boards. For the position of the oscillator circuit
board, see Figure 3.2. For how to remove the upper cover, refer to "3.1 Removing the Upper Cover"
(page 22).
Figure 3.7 Replacing the oscillator circuit boards
(3) Attach the J1 connector of another oscillator circuit board
for replacement to the connector of the MCU-dependent
board.
(4) Secure the oscillator circuit board with the screw.
(1) Unscrew the screw securing the oscillator circuit board.
(2) Lift off the oscillator circuit board.