M30850T2-EPB User’s Manual 2. Setup
REJ10J1005-0200 Rev.2.00 April 1, 2007
2.9 Connecting the User System
There are eight ways available to connect the emulation probe to user systems as shown in Figure 2.7.
144-pin 0.5mm pitch
0.65mm pitch 0.5mm pitch
M30800T-PTC
M3T-100LCC-DMS
M3T-FLX100-T M3T-FLX100-R
●: No1. pin
*1: These items are available in one package
*1
LCC socket
100-pin LCC
M3T-DIRECT100S M3T-DUMMY100S M3T-F160-100NSD
100-pin LQFP M3T-FLX-144NSD
144-pin LQFP
100-pin
M3T-F160-100NRB
100-pin QFP
(not included)
Emulation probe
(not included)
(not included)(not included)
(not included) (not included) 100-pin QFP
(not included)
100-pin QFP
(not included) (not included) (not included)
Figure 2.7 Connection of the M30850T2-EPB and user system
CAUTION
Note on Connecting the User System:
z Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator.
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK and TQSOCKET are trademarks of Tokyo Eletech
Corporation.
Page 29 of 98