Renesas RZB-ZMD16C-ZDKBoard Specifications, Hardware Specifications, Power Supply Requirements

Applications Engineering

8.0 RZB-ZMD16C-ZDK Board Specifications

8.1. Hardware Specifications

Table 8-1lists the specifications of the RZB-ZMD16C-ZDK Board.

Table 8-1: RZB-ZMD16C-ZDK Board Specifications

Item	Specification
MCU	M30280FAHP
Clocks	Main Clock: crystal 10 MHz, PLL, or ring oscillator
	Sub Clock: 32.768 kHz crystal
Memory	RAM: 8kB (8064 Bytes user available due to kernel)
(ICD)	High E/W Data Block: 2kB × 2 (4096 Bytes)
	Flash ROM: 96kB (94kB user available due to kernel)
Connectors	[J1-J4]: Four 2×10-pin measurement test points connected to the MCU
	pins. Can also be used to connect your own expansion boards via 2×10
	headers.
	[J7]: In-Circuit Debug connector (UART1 for FoUSB-ICD)
	[P1]: 9-Sub-D RS232 connected via RS232 transceiver to UART2
Jumpers	[JP1]: MCU Power for Icc Measurements
	[JP2]: Power LED and RS232 Power connect
Switches	[S1]: pushbutton (connected to P10_4)
	[S2]: pushbutton (connected to P10_5)
	[S3]: pushbutton (connected to P10_6)
	[S4]: pushbutton (connected to Reset)
	[SW1]: Power source select switch. If set toward the ICD connector: power
	provided by ICD. If set toward the power connector: power provided via
	power connector.
LEDs	[D1] (Red): User output (connected to P3_4)
	[D2] (Yellow): User output (connected to P3_5)
	[D3] (Green): User output (connected to P3_6)
	[D4] (Red): Power On (if jumper JP2 shorted)
LCD	2-line × 8-character LCD with KS0066 controller IC

8.2. Power Supply Requirements

The RZB-ZMD16C-ZDK Board will draw about 35mA with no LEDs on. With the ICD powered from the board, the current draw will be about 85mA.

The board has a 3.3V low dropout voltage regulator with an input voltage range from 3.4V to 16V.

8.3. Operating Environment

Table 8-2lists the environmental conditions for using and storing the RZB-ZMD16C-ZDK board. Store the board in a conductive bag inside the original factory packaging box.

Table 8-2: Operating Environment

Environmental Condition	Ambient Temperature	Ambient Humidity
Operating	0 - 55°C	30 to 80% (non-condensing)
	(No corrosive gas allowed)
Storage	-30 to 75°C	30 to 80% (non-condensing)
	(No corrosive gas allowed)
RZB-ZMD16C-ZDK User’s Manual Rev 1.2 20/ 33		August 2006