ResMed C-Series manual English, Emissions test, Compliance, Electromagnetic, environment—guidance

Guidance and Manufacturer’s Declaration - Electromagnetic Emissions and Immunity

Guidance and manufacturer’s declaration—electromagnetic emissions

The C-Series Tango system is intended for use in the electromagnetic environment specified below. The customer or the user of the C-Series Tango system should assure that the device is used in such an environment.

Emissions test	Compliance	Electromagnetic
		environment—guidance
RF emissions CISPR11	Group 1	The C-Series Tango system uses RF
		energy only for its internal function.
		Therefore, its RF emissions are very
		low and are not likely to cause any
		interference in nearby electronic
		equ pment.
RF emissions CISPR 11	Class B	The C-Series Tango system is suitable
		for use in all establishments, including
Harmonic Emissions	Class A	domestic establishments and those
IEC 61000-3-2		directly connected to the public low-
		voltage network that supplies
Voltage Fluctuations/Flicker	Complies	buildings used for domestic purposes.
Emissions IEC 61000-3-3

Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to EMC information provided in this document.

Warnings: The C-Series Tango system should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is necessary, the C-Series Tango system should be observed to verify normal operation in the configuration in which it will be used.

The use of accessories (eg humidifiers) other than those specified in this manual is not recommended. They may result in increased emissions or decreased immunity of the C-Series Tango system.

English

11