The Tango Interface
Heating indicator
Power indicator
English |
Standby mode | When the Tango is powered, the power indicator is lit and the run hours |
| are displayed on the LCD. All changes to altitude and ramp settings are |
| made in standby mode. |
|
|
Ramp | Setting a ramp time enables therapy to start at a low pressure and build |
| up to full pressure during the ramp time (see “Set ramp time”). |
|
|
Altitude | Changes in altitude affect the pressure delivered by the Tango. The |
| altitude feature compensates for pressure changes related to changes in |
| altitude (see “Set altitude”). |
|
|
Run hours | Run hours are displayed when the Tango is in standby mode. |
|
|
Humidifier | The humidifier buttons are used when using the ResMed |
| Humidifier and when setting the altitude. The heating indicator lights |
| when the humidifier is on. |
|
|
Setting up the Tango
CAUTION
! • Be careful to place the device where it cannot be bumped, and where no one will trip over the power cord.
• If you put the device on the floor, make sure the area is free from dust and clear of bedding, clothes or other objects that could block the air inlet.
• Make sure the area around the device is dry and clean.
WARNING
! • Make sure the power cord and plug are in good condition and the equipment is not damaged.
3