
Carry handle | Data Card | |
Screen | module | |
| ||
Keypad |
| |
| Air inlet | |
Air outlet | DC | |
AC | ||
|
Masks
The following ResMed mask systems are recommended for use with these devices:
Mask Type | Name |
|
|
Nasal Masks | • Mirage Vista™ Nasal Mask |
| • Ultra Mirage™ Nasal Mask |
| • Ultra Mirage™ II Nasal Mask |
| • Mirage Activa™ Nasal Mask |
| • Mirage Micro™ Nasal Mask |
|
|
Nasal Pillows Systems | • Mirage Swift™ Nasal Pillows System |
| • Mirage Swift™ II Nasal Pillows System |
|
|
Full Face Masks | • Mirage™ Liberty Full Face Mask |
| • Mirage™ Quattro Full Face Mask |
| • Ultra Mirage™ Full Face Mask |
|
|
For information on using masks, see your mask manual. For the latest available masks, see www.resmed.com.
Humidifier
If you are experiencing dryness of the nose, throat or mouth, the H4i heated humidifier is recommended for use with these VPAP devices.
WARNING
!• Only ResMed mask systems are compatible for use with these VPAP devices.
• Only the H4i is compatible for use with these VPAP devices.
ResScan Data Card
The ResScan Data Card may be used with these VPAP devices either to help your clinician to monitor your treatment or to provide you with updates to your device settings.
Supplemental Oxygen
The VPAP IV and VPAP IV ST are designed to be compatible with up to 15 L/min of supplemental oxygen. At a fixed flow rate of supplemental oxygen flow, the inhaled oxygen concentration will vary, depending on the pressure settings, patient breathing pattern, mask selection, and the leak rate.
WARNING
!Always use the ResMed Oxygen Connector Port when adding supplemental oxygen at the flow generator outlet.
2