Connecting the Cables

CONNECTING A REVOLABS FUSION MICROPHONE SYSTEM TO POLYCOM VSX7000S VIDEO CODEC

1.Connect a male RCA-RCA audio cable between the “CONF IN” port on the Fusion and the red “AUDIO OUT ” port on the VSX7000s.

2.Connect a male RCA-RCA audio cable between the “CONF OUT ” port on the Fusion and the red “LINE INPUT” port on the VSX7000s.

3.Connect a Male RCA audio cable between the “Room Out” port on the Fusion and the Speakers.

Note: The speakers used for audio and video conferencing with this configuration must be connected to the Fusion for proper echo cancellation.

Revolabs VSX7000s setup guide Connecting the Cables