Revolabs setup guide Revolabs FusionTM Microphone System - Sony XG-80 Setup Guide

Revolabs FusionTM Microphone System — Sony XG-80 Setup Guide

This setup guide will guide you through the steps needed to properly connect a Revolabs Fusion Microphone System to a Sony XG-80 video codec.

Note: It is important to carefully follow these instructions in order and completely. Otherwise your Fusion Microphone System and/or the video codec may not function properly. Please read through these instructions completely before proceeding.

Contact Revolabs technical support if you have any questions.

Requirements for connecting systems:

1.Revolabs Fusion 4 or 8 channel Microphone System

2.Sony XG-80 video codec

3.QTY 1 Female XLR—1/8” mono male cable* (i.e. Calrad 10-144)

4.QTY 1 RCA male — RCA male cable

5.Amplified Speakers

* Optional Item