Rheem 9 Kw Thru 36 Kw manual 50, 85 AND 120 U.S GALLON CAPACITIES 208, 240, AND 600 VOLTAGES

®

C O M M E R C I A L

W A T E R H E A T E R S

SURFACE MOUNTED ELECTRIC TANK-TYPE WATER HEATERS 9 KW THRU 36 KW

RHEEM-RUUDline of commercial electric water heaters come in a broader range of models. Our completely redesigned single panel control center with hinged door features ready access to all controls and elements. With single or three phase operation, these units provide the most versatile and dependable operation we’ve ever offered in a commercial electric water heater.

Thick, R-Foam®insulation completely surrounds the tank, maximizing heat retention while improv- ing energy costs.

Features the Lifeguard® high-efficiency stainless- steel clad elements for long element life and performance.

Seven different inputs from 9 KW to 36 KW to meet most commercial and industrial needs.

Model Applications

In addition to being suitable for general commer- cial hot water applications, these units are also ideal for point-of-use installations, eliminating costly temperature loss in long piping runs. A single unit can be used as a booster heater to satisfy the hot water requirements of commercial dishwashers. A single temperature storage unit, when installed with a mixing valve, will supply two temperatures in food service establishments. For larger volume hot water requirements, 2, 3 or 4 units can be parallel manifolded, using optional factory kits.

Energy Information

50, 85 AND

120 U.S.

GALLON CAPACITIES

208, 240, AND 600 VOLTAGES

EGS-SURFACE MOUNTED THERMOSTAT MODELS

Rheemglas® commercial electric water heaters are quality engineered to provide the maximum amount of hot water available from storage capacity of the tank and energy input of heating elements. Surface mounted thermostat models provide water from 120°F to 160°F (50°C to 71°C). Detailed Engineering Information for 208, 240 and 600 volt models with single or three phase operation will be found in Table A, B or C.

These units have been tested according to procedures specified by CSA and meet or exceed the energy efficiency requirements of ASHRAE Standard 90.1b 1992 requirements for energy conservation.