TIMER OPERATION
20
MANUAL BOOSTING – “OVERRIDE” FUNCTION
The timer also has an “OVERRIDE”
function to allow for boosting the
temperature of the water in the solar
storage tank, outside of the set hours.
SU
ON
TIME PROG DAY HR MIN
z z z z z
RANDOM
y R z MAN
09:15 • To activate manual boosting, press
the “MAN” button once.
The word “ON” appears in the
display.
• When the water has been heated to
the temperature setting of the gas
control, the gas burner will
automatically extinguish. Example: The Manual Boosting
“Override” function “ON” at quarter
past nine on Sunday morning.
• To deactivate the manual boosting,
press the “MAN” button once.
The word “OFF” appears in the
display.
Note: This is necessary to prevent
further boosting of the water
temperature, whenever hot water is
used. This could potentially reduce
the solar gain for one day.
WE
OFF 15:10
TIME PROG DAY HR MIN
z z z z z
RANDOM
y R z MAN
• If the “OVERRIDE” function is not
manually deactivated, it will
automatically be deactivated at the
end of the next timer set boost
period.
Example: The Manual Boosting
“Override” function “OFF” at ten past
three on a Wednesday afternoon.
CAUTION – “RANDOM” FUNCTION
The timer features a “RANDOM” function setting, indicated by the word
“TIMER” flashing in the display. The “RANDOM” function will cause the timer to
switch ON and OFF completely at random, regardless of any set programmes.
If the “RANDOM” function is inadvertently set, press the “DAY” and “HR”
buttons simultaneously to deactivate (the word “TIMER” disappears from the
display).
Note: It is recommended the “RANDOM” function never be used.