(SG-18)
(SPRM-1)

SAFETY

 

SAFETY

 

 

 

 

DANGER!

Rotary Mowers are capable under adverse conditions

 

of throwing objects for great distances (100 yards or

 

more) and causing serious injury or death. Follow

 

safety messages carefully

 

STOP MOWING IF PASSERSBY ARE WITHIN 100 YARDS UNLESS:

 

-Mower Deck Shielding, and Discharge Deflector are installed

 

and in good, working condition;

 

-Mower section is running close to and parallel with the ground

 

without exposed Blades;

 

-Passersby are outside the existing thrown-object zone;

 

-All areas have been thoroughly inspected and all foreign material

 

such as rocks, cans, glass, and general debris has been removed.

 

NOTE: Where there are grass and weeds high enough to hide debris

 

that could be struck by the blades, the area should be: inspected

 

and large debris removed, mowed at an intermediate height, in-

 

spected closely with any remaining debris being removed, and mowed

 

again at desired final height. (This will also reduce power requiredto

 

mow, reduce wear and tear on the Mower drivetrain, spread cut

 

material better, eliminate streaking, and make the final cut more

 

uniform.) (SFM-3)

DANGER!

This Implement is wider than the Tractor. Be careful when operating

 

or transporting this equipment to prevent the Implement from running

 

into or striking sign posts, guard rails, concrete abutments or other

 

solid objects. Such an impact could cause the Implement and Tractor

 

to pivot violently resulting in loss of steering control, serious injury, or

 

even death. Never allow the Implement to contact obstacles. (S3PT-12)

DANGER!

Replace bent or broken blade with new blades. NEVER ATTEMPT TO STRAIGHTEN OR WELD

 

ON BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE BLADE

 

WITH SUBSEQUENT FAILURE AND POSSIBLE SERIOUS INJURY FROM THROWN BLADES.

 

(SGM-10)

 

PARTS INFORMATION

Servis-Rhino mowers use balanced and matched system components for blade carriers, blades, cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Servis- Rhino specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit” parts may reduce mower performance, void warranties, and present a safety hazard. Use genuine Servis-Rhino mower parts for economy and safety.

SEE YOUR SERVIS-RHINO DEALER

In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.

FM100 02/04

Safety Section 1-10

© 2004 Alamo Group Inc.

 

Page 16
Image 16
Rhino Mounts FM100 manual Parts Information, See Your SERVIS-RHINO Dealer