MAINTENANCE

MAINTENANCE

Maintenance Instructions

Before operating the mower, make sure it is properly lubricated and thoroughly inspected. Only a minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and trouble free operation.

Check all bolt tightness BEFORE initial operation of the mower. Retorque all hardware after the first 4 hours of operation. A torque chart is provided at the end of the Maintenance Section.

NOTE: Before initial start-up, check outer cuttershaft bearing setscrews. Standard 3/16 allen wrench must be modified as shown.

This modified tool allows access between housing and bearing inner race to tighten setscrews. Check setscrews after first days of operation. If loose, tighten and recheck again the next day or until setscrews are found to remain tight.

RHD 02/11

Maintenance Section 5-2

© 2011 Alamo Group Inc.

Page 132
Image 132
Rhino Mounts RHD88, RHD74, RHD62, RHD96 manual Maintenance Instructions