MAINTENANCE
Banjo Gearbox
The gearbox should not require additional lubricant unless the box is cracked or a seal is leaking. It is recommended that the check plug be removed after every 8 to 10 hours of operation and oil added until it shows proper level.
Use Rhino
Driveline
The Driveline should be inspected each morning before the mower is started. Cross & bearings are located at each end of driveline.
Telescoping tube sitting is accessible by rotating driveline shield tubes until hole in shield exposes grease fitting.
Lubricate all fittings with a good quality Lithium Soap compatible E.P. grease meeting the NLGI #2 specifications and containing no more than 1%.
Check the cross & bearing kits for wear by rotating tractor yoke back and forth while implement yoke is attached to mower. If there is noticeable movement in driveline, replace the cross & bearing kit before it causes damage to driveline.
RHD 02/11 | Maintenance Section |
© 2011 Alamo Group Inc.
