Operation
Operation
Unpacking Your SummerBreeze Zone Heater
•Cut open the taped edges, remove the protective packaging materials and lift heater from carton. Find a level location to place the unpackaged heater.
•Keep the packaging for
•Plug the power cord directly into an unused, grounded 120 volt, 15 amps or higher circuit receptacle.
Turning the Power On Programmable Thermostat Models
• Press the on/off switch on the back of the |
heater to On. An amber light will display on |
the front of the unit indicating the heater is |
plugged into an electrical outlet and turned |
on. |
• Slide the on/standby switch on the |
thermostat to On. It is not necessary to |
ever set the thermostat to Standby because |
the master on/off switch on the heater |
controls the power to the heating element. |
• Set the desired temperature using the up/ |
On/Off Switch
Turning the Power On
Dial Thermostat Models
•Press the on/off switch to On. An amber light will display on the front of the unit indicating the heater is plugged into an electrical outlet and turned on.
•Turn the thermostat dial to set the desired temperature.
•If the thermostat is set above the room’s temperature the heater fan will begin to operate after a few minutes.
On/Off Switch
50 | • | 60 | • | 70 |
|
|
| ||
• |
|
|
| • |
40 |
|
|
| 8 |
|
|
| 0 | |
• |
|
|
| • |
|
|
|
| F° |
Dial Thermostat
down temperature adjustment buttons. |
See Setting the Temperature (page 10) for |
complete instructions. |
• If the thermostat is set above the room’s |
temperature the heater fan will begin to |
operate after a few minutes. |
Turning the Power Off
All Models
•Press the on/off switch on the back of the heater to Off.
Programmable Thermostat
8 | 9 |
