Chapter 11
11 - 24
7Clean the primary corona wire inside the
drum unit by gently sliding the blue tab
from right to left several times. Return
the blue tab to the Home position ()
before reinstalling the drum unit and
toner cartridge assembly.
8Install the drum unit and toner cartridge
assembly in the machine.
9Close the front cover.

Replacing the drum unit

The machine uses a drum unit to create print
images on paper. If the LCD shows
Change Drum Soon, the drum unit is near
the end of its life and it is time to buy a new
one.
Even if the LCD shows Change Drum Soon,
you may be able to continue printing without
having to replace the drum unit for a while.
However, if there is a noticeable deterioration
in the output print quality (even before
Change Drum Soon appears), then the
drum unit should be replaced. You should
clean the machine when you replace the
drum unit. (See Cleaning the laser scanner
window on page 11-20.)
Note
The drum unit is a consumable item, and it is
necessary to replace it periodically. There are
many factors that determine the drum life,
such as temperature, humidity, type of paper
and how much toner you use for the number
of pages per print job. The estimated drum life
is up to 12,000 pages. The actual number of
pages your drum will print may be
significantly less than these estimates.
Because we have no control over the many
factors that determine the actual drum life, we
cannot guarantee a minimum number of
pages that will be printed by your drum.
IMPORTANT
When removing the drum unit, handle it
carefully because it contains toner. If toner
scatters and your hands or clothes get
dirty, immediately wipe or wash with cold
water.