Chapter 3
3 - 4

Sending a fax at the end of a

conversation

At the end of a conversation you can send a
fax to the other party before you both hang
up.
1Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
2If it is not illuminated in green, press
(Fax).
3Load your document.
Press Start.
4Replace the handset.

Out of Memory message

If you get an Out of Memory message while
scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message while
scanning a subsequent page, you will have
the option to press Start to send the pages
scanned so far, or to press Stop/Exit to
cancel the operation.
Note
If you get an Out of Memory message while
faxing and you do not want to delete your
stored faxes to clear the memory, you can
send the fax in real time. (See Real Time
Transmission on page 3-6.)

Basic sending

operations

Sending faxes using multiple

settings

When you send a fax you can choose any
combination of these settings: cover page,
contrast, resolution, overseas mode, delayed
fax timer, polling transmission or real time
transmission.
1If it is not illuminated in green, press
(Fax).
After each setting is accepted, the LCD
will ask if you want to enter more
settings:
(For EU and Asia/Canada)
OR
(For USA and Canada)
2Press 1 to select more settings. The
LCD will return to the Setup Send
menu.
OR
Press 2 if you have finished choosing
settings and go to the next step.
Next
1.Yes 2.No
Other Settings
1.Yes 2.No