Setup Send
3 - 3
3

Fax Redial

If you are sending a fax manually and the line
is busy, press Redial/Pause, and then
press Start to try again. If you want to
make a second call to the last number dialled,
you can save time by pressing
Redial/Pause and Start.
Redial/Pause only works if you dialled
from the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.

How to Fax

Automatic transmission

This is the easiest way to send a fax.
Press Start immediately after dialling. (For
an example of automatic faxing, follow the
steps in Faxing from the ADF on this page.)

Faxing from the ADF

1If it is not illuminated in green, press
(Fax).
2Put the document face down in the ADF.
3Dial the fax number.
Press Start. The machine starts
scanning the document.

Manual transmission

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
(For EU and Asia/Oceania model, use the
handset and dial of the external phone)
1If it is not illuminated in green, press
(Fax).
2Load your document.
3Pick up the handset and listen for a dial
tone.
4On the external phone, dial the fax
number you want to call.
5When you hear the fax tone, press
Start.
6Replace the handset.