2 - 1
2
2
Initial setup
Setting the Date and Time
When the machine is not in use it will display
the date and time. If you set up the Station ID
the date and time displayed by your machine
will be printed on every fax you send. If there
is a power failure, you may have to reset the
date and time. No other settings will be
affected.
Note
Your machine can store the date and time up
to 4 days if there is a power failure.
1Press Menu/Set, 0, 2.
2Enter the last two digits of the year.
Press Menu/Set.
3Enter two digits for the month.
Press Menu/Set.
(For example, enter 09 for September,
or 10 for October.)
4Enter two digits for the day.
Press Menu/Set.
(For example, enter 06 for 6th.)
5Enter the time in 24-Hour format.
Press Menu/Set.
(For example, enter 15:25 for 3:25 P.M.)
6Press Stop/Exit.
The LCD now shows the date and time
whenever the machine is idle in Fax
mode.
When the machine is in Sleep mode, the
LCD shows Sleep. (See Sleep Time on
page 2-8.)
Setting Tone and Pulse
dialling mode
(Not available in some
countries)
1Press Menu/Set, 0, 4.
2Press ▲ or ▼ to select Pulse (or Tone).
Press Menu/Set.
3Press Stop/Exit.
Getting started
2.Date/Time
4.Tone/Pulse