140
To transfer images in Mass Storage Mode, follow the steps below:1.
Change [USB CONNECTION] to [MASS STR] on the Setup
menu.
2.
Make sure that the camera power is off.
3.
Connect the accessory USB cable to a USB port of your
computer.
4.
Connect the USB cable to the USB
terminal of the camera.
The camera power becomes on.
Your computer automatically reads a file
necessary for recognizing the camer a as a
drive.
After this preparation, the camera is
displayed as a drive at My C omputer
(Windows) or Desktop (Macintosh).
5.
From the displayed drive,
copy a file to the desired
location.
The figure at right shows the fo lder
configuration in a drive.
When the contents of the built-i n
memory are displayed, the drive
name is RICOHDCI.
Caution
• During transfer, do not d isconnect the USB cable.
• If a file with the same name already exists at the destination, it is overwritten. If you do not
want the file to be o verwritten, rename the file or transfer images to another fo lder.
Note
When a SD memory card is inserted, its files are displayed. Otherwise, files in the built-in
memory are displayed.
Example of the Windows
XP screen