Ricoh 6513 manual Selecting Modes for Outside Designated Areas, 171

Selecting Modes for Outside Designated Areas

Selecting Modes for Outside Designated Areas

Reference

The available modes for area editing depend on the area shape. ⇒ P.182 “Combination Chart for Area Editing”.

For functions that cannot be used together in area editing, ⇒ P.182 “Combina- tion Chart for Area Editing”.

More than one mode can be set. However, there are some limitations, ⇒ P.182 “Combination Chart for Area Editing”.

The modes that can be set for outside areas are as follows:

•Color/Image Adjustment: Image Density, Color Mode, Original Type, Im- age Adjustment, Color Adjustment, Color Balance Adjustment

•Color Creation: Color Conversion, Color Erase, Color Background, Paint, Type Mask

•Image Creation: Outline Image, Shadow Image, Positive/Negative

Note

❒Color/Image Adjustment's default setting:

•Image Density - Manual Image Density

•Color Mode - Black

•Original Type - Text/Photo

❒You can change the default settings. ⇒ P.211 “User Tools”.

❒The way to set modes is basically the same as for the entire image. For details, refer to each page.

•To fill an area with a selected color, select the Paint.

•Image Density (⇒ P.28 “Adjusting Copy Image Density”.)

•Original Type (⇒ P.36 “Selecting the Original Image Type”.)

•Color Adjustment (⇒ P.140 “Color Adjustment”.)

•Color Conversion (⇒ P.94 “Color Conversion”.)

•Color Background (⇒ P.97 “Color Background”.)

•Type Mask (⇒ P.99 “Type Mask”.)

•Outline Image (⇒ P.101 “Outline Image”.)

•Positive/Negative (⇒ P.114 “Positive/Negative”.)

•Color Mode (⇒ P.30 “Selecting a Color Mode”.)

•Image Adjustment (⇒ P.142 “Image Adjustment”.)

•Color Balance Adjustment (⇒ P.131 “Color Balance Adjustment”.)

•Color Erase (⇒ P.96 “Color Erase”.)

•Shadow Image (⇒ P.102 “Shadow Image”.)

•Save Area (⇒ P.169 “Save Area”.)

5

171