Ricoh 6513 manual 190, Justment

6

Troubleshooting

Problem		Cause	Action
Copy image is not clear.		The original image type is not	Select the proper original im-
		selected properly.	age type. ⇒ P.28 “Adjusting
			Copy Image Density”.
			Adjust the sharpness of the
			image with the Soft/Sharp
			function. ⇒ P.142 “Image Ad-
			justment”.
The same copy area is dirty		The exposure glass or docu-	Clean them. ⇒ P.230 “Main-
whenever making copies.		ment feeder belt is dirty.	taining Your Machine”.
When using Enlarge mode,		Shadows may appear because	Select the Border Erase mode.
shadows appear on the mar-		the whole surface area of the	⇒ P.86 “Erase”.
gins of copies.		exposure glass was scanned
		in.
Copies are blank or parts of		The original is not place cor-	Place the originals correctly.
the image are not copied.		rectly.
		An improper paper size is se-	Select the proper paper size.
		lected.
		The selected reproduction ra-	Select the proper reproduc-
		tio does not match the paper	tion ratio.
		size.
A moire pattern is produced		Text mode is selected.	Select Auto Original Type Se-
on copies as shown in the il-			lect mode or Photo mode. ⇒
lustration.			P.36 “Selecting the Original Im-
			age Type”.
	R
		The line images of the original	Place the original on the expo-
		might be overlapped with	sure glass at a slight angle.
		each other.
			Adjust the sharpness of the
			image. ⇒ P.142 “Image Adjust-
			ment”.
Color tone of copies is differ-		The color balance is not set	Adjust the Color Balance. ⇒
ent from that of originals.		properly.	P.131 “Color Balance Adjust-
			ment”.
			Perform the Auto Color Cali-
			bration (A.C.C.). ⇒ P.142 “Im-
			age Adjustment”.
Color tone of copies is com-		Unsuitable color setting.	Perform Auto Color Calibra-
pletely different from that of			tion (A.C.C.). ⇒ P.142 “Image
originals.			Adjustment”.
			If you cannot correct the prob-
			lem by performing Auto
			Color Calibration, contact
			your service representative.

190