Ricoh 6513 manual 188, Troubleshooting

Troubleshooting

	Condition	Action
	The machine cannot detect	Place custom size original on the exposure glass.
	the original size.
		Enter both horizontal and vertical sizes of the custom original. ⇒
		P.45 “Copying onto custom size paper with the bypass tray”.
		Select paper manually, not in Auto Paper Select mode.
		Do not use Auto Reduce/Enlarge mode.
		Place your originals.
	The machine instructs you	Place the original in the same direction as the copy paper.
	to check the original direc-
	tion.
	The machine instructs you	Select the proper paper size.
	to check paper size.
	The machine cannot sort	Select the proper paper size that can be used in Sort mode. ⇒
	this size paper.	P.116 “Sort”.
	The machine cannot stack	Select the proper paper size that can be used in Stack mode. ⇒
	this size paper.	P.117 “Stack”.
	You cannot enter the de-	You can change the maximum copy quantity that you can make at
	sired copy set number.	a time. ⇒ P.217 “General Features”.
6
	The machine instructs you	Reset the duplex tray correctly. ⇒ P.4 “Guide to Components”.
	to set the duplex tray.
	The machine instructs you	Wait for the machine to warm-up.
	to wait.
	The panel display is off.	Press the {Energy Saver} key to cancel Energy Saver mode.
		Turn on the operation switch.
		Adjust the Screen Contrast. ⇒ P.7 “Operation Panel”.

If you cannot correct the problem by taking the above actions, please contact your service representative.

188