Ricoh R4 Assigning a Function to the ADJ. Button ADJ BTN. SET.1/2, Available Settings Refer to

Assigning a Function to the ADJ. Button (ADJ BTN. SET.1/2)

Pressing the ADJ. button enables you to display the screens for setting the exposure and white balance with fewer button operations.

You can also use [ADJ BTN. SET.1] and [ADJ BTN. SET.2] to add a camera function that can be activated by pressing the ADJ. button.

Available Settings	Refer to
OFF *Default setting for [ADJ BTN. SET.2]	-
ISO (ISO SETTING) *Default setting for [ADJ BTN. SET.1]	P.83
QUALITY (PIC QUALITY/SIZE)	P.62
FOCUS	P.66
SHARP (SHARPNESS)	P.70
METERING (PHOTOMETRY)	P.69
AUTO BKT (AUTO BRACKET)	P.72
CONT MDE (CONT. MODE)	P.89
WITH SND (IMAGE WITH SOUND)	P.78

To assign a function to either [ADJ BTN. SET.1] or [ADJ BTN. SET.2], follow the steps below.

1. Display the SETUP menu.

For the operating procedure, see P.111.

2. Press the " button to select [ADJ BTN. SET.1] or [ADJ BTN. SET.2], and then press the $ button.

3. Press the !" buttons to select the desired setting.

4. Press the C/Dor # button.

5. If you pressed the # button in

Step 4, press also the C/Dbutton.

This setting is used until it is changed.

Reference

For information on how to use the ADJ. button, see P.59.

Changing Camera Settings

115