Changing the Auto Power Off Setting

(AUTO POWER OFF)

If you do not operate the camera for a set period of time, it will shut off automatically to conserve battery power (Auto Power Off).

By default, Auto Power Off is set to one minute, but you can change this setting.

Available Settings

OFF (Auto Power Off is turned off)

1 MIN. *Default setting

5MIN.

30MIN.

To change the Auto Power Off setting, follow the steps below.

1. Display the SETUP menu.

For the operating procedure, see P.111.

2. Press the " button to select [AUTO POWER OFF] and press the $ button.

3. Press the !" buttons to select the desired setting.

4.

5.

Press the C/Dor # button.

If you pressed the # button in Step 4, press also the C/D button.

This setting is used until it is changed.

Note

To continue using the camera after Auto Power Off turned the camera off, press the POWER button to turn the camera on again. You can also press and hold the 6 (Playback) button for more than one second to turn on the camera in Playback Mode.

Auto Power Off does not work when the camera is connected to a computer.

When using Interval Shooting, the settings made here are not valid and Auto Power Off does not work.

116

Page 118
Image 118
Ricoh R4 manual Changing the Auto Power Off Setting, Auto Power OFF, Available Settings