
103
5
Using JOB Navi. Image Capture Guide List
HRepeat steps F and G until all the
images have been recorded.
IWhen all the images have been
recorded, select [EXIT].
Note
•If the Keep Settings mode for [GUIDE LIST] is set to [ON], even if the
mode dial is set to another setting during recording (steps C or D) or
the power is turned off, you can perform operation from the previous
image select screen by switching to still image mode and pressing the
Ô button. However, you cannot do this if you change the storage
memory.
Connect the camera to the PC once more and proceed as follows.
Pasting the Recorded Images to the TableThis function enables you to paste images recorded with the camera to a
Microsoft Excel document.
AInsert the card with which you have finished recording into the
camera.
BStart Microsoft Excel and open [Sample1.xlt].
CClick on [Enable Macros].
DClick on the [Paste All Images] button.
The dialog box for selecting the Guide List title will be displayed.
EClick on [+] on the left of the card drive.
The camera media (internal memory, CF card, etc.) will be displayed.
FClick on [+] on the left of the [DCIM] folder.
GSelect the [xxxRLIST] folder.
When you record images using the Guide List, a [(no.) RLIST] folder is created
for each series of recordings (for example, [101RLIST], [102RLIST]). The folder
with the highest number is the newest folder. Select the newest folder.