110
Setting the Image Capture Guide List on the Browser
This section explains how to create an Image Capture Guide List (hereafter
referred to as Guide List) on the browser, and how to transfer a Guide List
saved as a file to the camera.
Note
• Instructions on how to record images using the Guide List are given in
“Recording Images Using the Guide List” (P.102).

Displaying the Guide Lists

This function enables you to display the JOB Navi. Image Capture Guide Lists
in the camera media.
All the various Guide List settings start from this screen.
ACheck that the camera is properly connected to the PC, that the
camera and the PC are turned on, and that the camera mode dial is
set to [ ].
BStart up the browser from the PC, input the IP address and display
the camera’s homepage.
See
• P.28 “Opening the Camera’s Homepage on the Browser”
CClick on [JOB NAVI. FUNC. SETTINGS].
The Guide Lists recorded in the camera will be displayed.