Other Print Operations

Form Feed

This section gives instructions for operating the machine when there is no tray for the selected paper size or type, or when paper loaded in the machine has run out.

 

Limitation

 

❒ The tray cannot be changed if the

 

following functions are set for it:

 

• Staple

 

• Punch

4

• Duplex Print to a tray that does

 

not support duplex printing

•Cover Sheet

•Front and Back Covers

•Slip Sheet

•Chaptering

Note

❒If form feed is selected for a tray with the following settings, you can change the tray by canceling the settings:

•Staple

•Punch

Print Using a Selected Tray

A Select the tray for form feed from those that appear on the display panel.

If you want to print after adding paper to the tray, select the tray after loading the correct paper.

Note

❒To load paper in the bypass tray, see p.14 “Setting Paper on the Bypass Tray”.

B Press [Continue].

The machine prints using the selected tray.

Note

❒If a tray with a smaller paper size is selected, the print job may be cut short, or other prob- lems may occur.

❒If Auto Continue is selected, form fed paper is printed after a set in- terval. See p.117 “System”.

If the machine does not have a tray for the selected paper size or paper type, or if the selected paper loaded in the machine has run out, a caution message appears.

If this message appears, do one of the following:

108