Ricoh Type 3260 Note, [OK], Note, Next], Reference, B Press [System Settings], F Select [OHP] or [Translucent], E Press [Paper Type: Bypass Tray]

Getting Started

Setting OHP transparencies

1	Note
	❒ For colour printing, do not use
	OHP transparencies that have eas-

ily melted surface.

❒Insert OHP transparencies in the K direction.

❒We recommend that you use a 4000ANSI lumen or brighter over- head projector to project OHP transparencies.

❒Paper settings can also be set using the printer driver. The following procedures are not necessary when setting paper sizes using the printer driver.

❒Paper size settings set using the printer driver have priority over those set using the machine's dis- play panel.

❒When the printer driver is not used, make settings using the dis- play panel.

Reference

For printer driver settings, see the printer driver Help.

A Press the {User Tools/Counter} key on the control panel.

B Press [System Settings].

C Press the [Tray Paper Settings] tab.

D Press [TNext] to scroll through the list.

E Press [Paper Type: Bypass Tray].F Select [OHP] or [Translucent].

G Press [OK].

The paper type selected is dis- played.

H Press the {User Tools/Counter} key.

Note

❒The settings made will remain valid until they are reset again. After printing on OHP trans- parencies or thick paper, make sure to clear settings for the next user.

18