ASSEMBLY

SQUARING THE BLADE TO THE MITER TABLE

See Figures 19 - 21.

Unplug the saw.

Pull the saw arm all the way down and engage the lock pin to hold the saw arm in transport position.

Loosen the miter lock handle approximately one-half turn.

Depress the miter lock plate and rotate the miter table until the pointer on the control arm is positioned at 0°.

Release the miter lock plate and securely tighten the miter lock handle.

Loosen bevel lock knob and set saw arm at 0° bevel (blade set 90° to miter table). Tighten bevel lock knob.

Place a combination square against the miter table and the flat part of saw blade.

NOTE: Make sure that the square contacts the flat part of the saw blade, not the blade teeth.

Rotate the blade by hand and check the blade-to-table alignment at several points.

The edge of the square and the saw blade should be parallel as shown in figure 19.

If the top or bottom of the saw blade angles away from the square as shown in figures 20 and 21, adjustments are needed.

Loosen the lock nut securing positive stop adjustment screw. Also loosen bevel lock knob.

Adjust positive stop adjustment screw to bring saw blade into alignment with the square. See

Figure 36.

Retighten bevel lock knob. Next, retighten lock nut securing the positive stop adjustment screw. Recheck blade-to-table alignment.

NOTE: The above procedure can be used to check blade squareness of the saw blade to the miter table at both 0° and 45° angles.

Your saw has several scale indicators. After squaring adjustments have been made, it may be necessary to loosen the indicators screws and reset them to zero. See Figures

17 and 18.

BEVEL

LOCK KNOB

MITER

FENCE

BLADE

 

MITER

 

MITER

 

MITER

LOCK

 

TABLE

COMBINATION

LOCK PLATE

HANDLE

SQUARE

CORRECT VIEW OF BLADE

SQUARE WITH MITER TABLE

Fig. 19

COMBINATION

SQUARE

VIEW OF BLADE NOT SQUARE WITH MITER TABLE,

ADJUSTMENTS ARE REQUIRED

Fig. 20

COMBINATION

SQUARE

VIEW OF BLADE NOT SQUARE WITH MITER TABLE,

ADJUSTMENTS ARE REQUIRED

Fig. 21

19

Page 19
Image 19
RIDGID MS1065LZA manual Squaring the Blade to the Miter Table, See Figures 19, Bevel Lock Knob Miter Fence Blade

MS1065LZA specifications

The RIDGID MS1065LZA is a high-performance miter saw designed for professional contractors and serious DIY enthusiasts alike. Known for its precision and versatility, this tool stands out in its category due to several key features and advanced technologies that enhance its functionality and ease of use.

One of the primary characteristics of the MS1065LZA is its robust 15-amp motor, which delivers a formidable 5,200 RPM. This powerful motor ensures smooth, consistent cuts through various materials including hardwood, softwood, and composite materials. Coupled with a 10-inch carbide-tipped blade, the saw is capable of making precise crosscuts and miter cuts, offering users the ability to tackle an array of projects with confidence.

The MS1065LZA includes an adjustable miter range of 0 to 60 degrees to the right and 0 to 52 degrees to the left, allowing for increased flexibility when making angled cuts. The dual bevel feature enables users to easily create bevel cuts in both directions without having to flip the material, which saves time and improves efficiency. The miter saw is also equipped with positive stops at common angles, ensuring quick and accurate settings.

Another notable feature is the innovative laser lighting system, which provides a clear cutting line for improved accuracy. This integrated laser guide helps users align their cuts precisely, reducing the likelihood of errors and waste material. Additionally, the transparent blade guard offers enhanced visibility while keeping the user safe during operation.

The MS1065LZA boasts a large, sturdy base that adds stability and supports larger workpieces, accommodating various project sizes. Its lightweight design enhances portability, making it easier to transport between job sites. The saw also comes with a dust bag that helps minimize mess, keeping the workstation cleaner while cutting.

In terms of user-friendly features, the large ergonomic handle enhances comfort during extended use. The saw is designed with easy-to-read scales and a simple locking mechanism for effortless adjustments. With its combination of power, precision, and practicality, the RIDGID MS1065LZA stands out as a top choice for professionals seeking reliable performance and exceptional results in their woodworking projects.