Manuals / RIDGID / Power Tools / Saw

RIDGID MS1065LZA manual Adjustments, To Adjust the Laser Guide, Bevel Pivot Adjustment

Models: MS1065LZA

1 32
Download 32 pages 27.76 Kb
Page 29
Image 29

ADJUSTMENTS

WARNING:

Before performing any adjustment, make sure the tool is unplugged from the power supply. Failure to heed this warning could result in serious per- sonal injury.

TO ADJUST THE LASER GUIDE

See Figure 34.

NOTE: Avoid direct eye exposure when using the laser guide.

Set both the bevel angle and the miter table at 0°.

Use the work clamp or a C-clamp to secure a piece of scrap wood.

Plug the saw into the power source and make a slight cut to score the wood.

Raise the saw arm and unplug the saw.

Lift and hold the lower blade guard.

Rotate the blade by hand until you can push and hold the laser button and the laser is near the center of the workpiece as shown in figure 34.

To adjust the laser, turn the adjustment screw counter- clockwise or clockwise using the hex key (1/16 in.) provided.

NOTE: When properly aligned, the laser should be on the left edge of the kerf.

Once aligned, remove and store the hex key (1/16 in.), and lower the blade guard.

NOTE: Always make practice cuts on scrap wood before cutting through your workpiece.

PIVOT ADJUSTMENTS

NOTE: These adjustments were made at the factory and normally do not require readjustment.

TRAVEL PIVOT ADJUSTMENT

ADJUSTMENT

SCREW

LASER APERTURE

BUTTON

HEX

KEY

LASER

MARK

Fig. 34

The saw arm should rise completely to the up position by itself.

If the saw arm does not raise by itself or if there is play in the pivot joints, have saw repaired at your nearest

AUTHORIZED SERVICE CENTER.

BEVEL PIVOT ADJUSTMENT

The compound miter saw should bevel easily by loosening the bevel lock knob and tilting the saw arm to the left.

If movement is tight or if there is play in the pivot, have saw repaired at your nearest AUTHORIZED SERVICE

CENTER.

POSITIVE STOP ADJUSTMENT FOR ANGLES

UP TO 48°

DEPTH STOP ADJUSTMENT

SCREW

POSITIVE STOP

ADJUSTMENT

FOR 45° ANGLES

Fig. 35

29

Page 28 Page 30
Page 29
Image 29
RIDGID MS1065LZA manual To Adjust the Laser Guide, Pivot Adjustments Travel Pivot Adjustment, Bevel Pivot Adjustment
Page 28 Page 30

MS1065LZA specifications

The RIDGID MS1065LZA is a high-performance miter saw designed for professional contractors and serious DIY enthusiasts alike. Known for its precision and versatility, this tool stands out in its category due to several key features and advanced technologies that enhance its functionality and ease of use.

One of the primary characteristics of the MS1065LZA is its robust 15-amp motor, which delivers a formidable 5,200 RPM. This powerful motor ensures smooth, consistent cuts through various materials including hardwood, softwood, and composite materials. Coupled with a 10-inch carbide-tipped blade, the saw is capable of making precise crosscuts and miter cuts, offering users the ability to tackle an array of projects with confidence.

The MS1065LZA includes an adjustable miter range of 0 to 60 degrees to the right and 0 to 52 degrees to the left, allowing for increased flexibility when making angled cuts. The dual bevel feature enables users to easily create bevel cuts in both directions without having to flip the material, which saves time and improves efficiency. The miter saw is also equipped with positive stops at common angles, ensuring quick and accurate settings.

Another notable feature is the innovative laser lighting system, which provides a clear cutting line for improved accuracy. This integrated laser guide helps users align their cuts precisely, reducing the likelihood of errors and waste material. Additionally, the transparent blade guard offers enhanced visibility while keeping the user safe during operation.

The MS1065LZA boasts a large, sturdy base that adds stability and supports larger workpieces, accommodating various project sizes. Its lightweight design enhances portability, making it easier to transport between job sites. The saw also comes with a dust bag that helps minimize mess, keeping the workstation cleaner while cutting.

In terms of user-friendly features, the large ergonomic handle enhances comfort during extended use. The saw is designed with easy-to-read scales and a simple locking mechanism for effortless adjustments. With its combination of power, precision, and practicality, the RIDGID MS1065LZA stands out as a top choice for professionals seeking reliable performance and exceptional results in their woodworking projects.