FEATURES
KNOW YOUR planer
See Figure 3.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
15 AMP MOTOR
The planer has a powerful 15 amp motor with sufficient power to handle tough cutting jobs.
AUTOMATIC FEED
Infeed and outfeed rollers feed the wood through the planer.
BLADE / TOOL STORAGE
A magnetic blade tool and 4 mm hex key are located in blade / tool storage under the rear table extension. For your convenience, an extra set of blades can be stored in the blade / tool storage.
DEPTH ADJUSTMENT HANDwheel
The depth adjustment handwheel is used to raise and lower the cutterhead assembly.
DUST HOOD
Attaching either a
IND-I-CUT™ DEPTH Gauge
The
REPEAT-A-CUT™
The
reset button
Opens the power line circuit when the motor temperature exceeds a safe level, when the motor is overloaded, or when a lower voltage condition exists.
SCALE
Quickly check the thickness of a workpiece.
SWITCH Assembly AND SWITCH KEY
The planer has an easy access switch. To lock in the OFF position, remove the switch key. Place the key in a location inaccessible to children and others not qualified to use the tool.
TABLE EXTENSIONS
Infeed and outfeed table extensions are attached to the machine and fold upright for easy storage. These table ex- tensions are helpful when planing long workpieces.
THICKNESS SCALE
The thickness scale accurately displays the height of the cutter blades to a maximum of 6 in.
tools needed
The following tools (not included) are needed for assembly and alignment:
framing square
Fig. 4
12
