ASSEMBLY
installing handwheel knob
See Figure 7.
Locate the handwheel knob and screw from among the loose parts. Insert the screw through the hole in the handwheel and tighten screw securely.
Using the hex head screw, attach the depth adjustment handwheel securely to the planer.
INSTALLING THE DUST HOOD
See Figure 8.
From the back of the machine, slip the slot on the dust hood over the tab inside the planer and align the dust hood over the holes on the side of the planer. Install the dust hood knobs by turning them clockwise. To minimize sawdust accumulation on your workpiece, attach either a
Note: The end of a 4 in. hose fits over the dust adaptor and requires a clamp (not included) to secure.
To open and close the dust hood door, align the arrows on the side.
NOTE: With the dust hood open, the sawdust is ejected from the back. With the dust hood closed, the sawdust is ejected from the adaptor.
DUST hood
KNOBS
DUST slot
ADAPTOR
Depth
adjustment handwheel
HEX HEAD | TO OPEN | DUST HOOD | |
ARROWS | door | ||
screw | |||
|
|
screw | HANDWHEEL | |
KNOB | ||
| ||
| Fig. 7 | |
|
|
TO CLOSE
Fig. 8
15
