Getting To Know Your Drill Press (continued)
25.Support Lock...Tightening locks table support to column. Always have it locked in place while operating the drill press.
26.Chuck Key...It is a self ejecting chuck key which will “pop” out of the chuck when you let go of it. This action is designed to help prevent throwing of the chuck key from the chuck when power is turned ON (I). Do not use any other key as a substitute, order a new one if damaged or lost.
27.Storage Tray...Conveniently holds drill bits and other accessories.
28. I/O Switch...Has locking feature. This feature is intended to prevent unau- thorized and possible hazardous use by children and others.
Insert key into switch.
NOTE: Key is made of yellow plastic.
Key
To turn drill ON (I), insert finger under switch lever and pull.
To turn drill OFF (O), push lever in.
NOTE: In an emergency: If the drill bit binds, stalls, stops or tends to tear the workpiece loose, you can quickly turn the drill off by hitting the switch with the palm of your hand.
26
