RIDGID WD1250 Introduction, Unpacking and Checking Carton Contents, Caster/Caster Foot Assembly

SP6663 12 GALLON.qxd 3/16/07 8:57 AM Page 4

Introduction

This Wet/Dry Vac is intended for house- hold use. It may be used for vacuuming wet or dry media and may be used as a blower.

Read this operator’s manual to familiarize yourself with the product features and to understand the specific usage of your new Vac.

Unpacking and Checking Carton Contents

Remove entire contents of carton. Check each item against the Carton Contents List. Contact 1-800-4-RIDGID or E-mail us at info@ridgidvacs.com if any parts are damaged or missing.

Carton Contents List
Key	Description	Qty
A	Wet/Dry Vac	1
B	Tug-A-Long Hose	1
C	Caster	4
D	Caster Foot w/Storage	4
E	Extension Wands	2
F	Utility Nozzle	1
G	Wet Nozzle	1
H	Car Nozzle	1
J	Operator’s Manual	1

A	C
J	D
	E
B
	H
F	G

Caster/Caster Foot Assembly

1.Turn the dust drum upside down on the floor.

2.Insert the caster feet into the bottom of drum, as shown (4 places).

3.Push on the caster foot until the foot is flush with bottom of the dust drum.

4.Insert the caster stem into the socket of the caster foot, as shown (4 places).

5.Push on the caster until the ball on the caster stem is inserted all the way into the socket. You will hear the ball snap into the socket and the caster will swivel easily when positioning is correct.

6.Turn the drum upright.

Caster

Caster Stem

Caster Ball

Pin

Caster

Foot

Hole

Dust

Drum

4