Maintain the Rimage 360i
Maintain the Rimage 360i
The procedures in this section will help keep your Rimage 360i in optimum operating condition.
General Cleaning
Tip: To keep your Rimage 360i clean, keep it in a dust free environment.
Tip: Use only Rimage inkjet print cartridges and, for best results, follow the guidelines below:
•Keep print cartridges sealed in the original package until they are needed.
•Store print cartridges at room temperature (60 - 78 degrees F or 15.6 to 26.6 degrees C)
•Store print cartridges in an upright position - not on their sides or upside down.
•Do not remove the protective tape from a new print cartridge until just before you install it. Once you remove the tape, do not reapply it.
•After you have removed the protective tape, avoid touching the contacts and nozzles.
•Print at least once a month to keep the print cartridges in good working order.
Cleaning the exterior
If your Rimage 360i becomes dusty:
1.Power off the Rimage 360i.
2.Wipe the exterior with a damp,
Cleaning the ink cartridge nozzles
This functionality allows you to clean or open the ink cartridge nozzles. The nozzles may become clogged from dried ink causing poor print because one or more nozzles are not delivering the appropriate quantity of ink.
1.Navigate to Printing Preferences (refer to page 9).
2.On the Service tab, select the Service ToolBox button.
3.Select the Clean Cartridges button. The Cleaning Cartridges window opens.
4.To clean the ink cartridge nozzles using the least amount of ink, select Light. The status field at the bottom of the Cleaning Cartridges window displays a message when the cleaning is complete.
Note: Print a test disc after cleaning the ink cartridge nozzles. If the print quality is poor, repeat this process and, in step 4, select Medium or Heavy to clean the ink cartridge nozzles.
5.To close the Cleaning Cartridges window, select OK.
6.To close the Rimage Service ToolBox window, select OK.
7.To close the Disc Color 360i Properties window, select OK.
110808_C | 15 |
