Rimage 360i
Centering the image on the disc
The Rimage 360i provides two ways to center the image on the disc. You can use the Auto Centering method or the Manual Centering method. The Auto Centering method is accurate to within +/- 0.5 mm. You can improve the centering position accuracy with the manual centering adjustment to better than +/- 0.2 mm. For optimal print quality, use this procedure to center the image on the disc.
Tip: Use the Center Image functionality only if the printed image is not centered on the disc. Image centering is set at the time of manufacture and usually does not need to be recalibrated in the field.
1.Navigate to Printing Preferences (refer to page 9).
2.At the Rimage 360i, open the front cover.
3.To open the printer tray, press the green (middle) button inside the front cover of the Rimage 360i. The printer tray opens.
4.On the Service tab, select the Service ToolBox button.
5.Select the Center Image button. The Centering Margins for Disc Color 360i dialog box displays.
6.Follow the directions in the dialog box to:
Auto center the image
Or
Manually center the image
7.When the image is centered, select OK to close the Centering Margins for Disc Color Printer 360i dialog box.
8.To close the Rimage Service ToolBox window, select OK.
9.To close the Disc Color 360i Properties window, select OK.
10.To close the printer tray, press the green (middle) button. The printer tray closes.
11.Close the front cover.
Tip: If you remove the ink cartridges and reinsert them, the system resets to show that the cartridges are full, regardless of the actual fill status.
Checking the ink levels
This functionality allows you to check the level of ink in the cartridges.
1.Navigate to Printing Preferences (refer to page 9).
2.On the Service tab, select the Service ToolBox button.
3.Select the Get Ink Level button. Ink level information displays in the Printer Status field.
4.To close the Rimage Service ToolBox window, select OK.
5.To close the Disc Color 360i Properties window, select OK.
14 | 110808_C |
