Rimage CDPR11 Note: If the printer is being used with a Rimage Producer system, this option must be

Rimage PrismPlus!
12 110635_G
Centering the image on the disc
There are two ways to center the label. If the printer has a microparallel cable connection, and
you have the Rimage serial cable, you can program the offsets. If you do not have the serial
cable, you can adjust the print position by changing the top and bottom margins.
1. In the CD Designer application, select Page Setup.
2. Select the Margins tab.
3. Change the left and top margins. Increase the top margin to bring the printed label
downward. Increase the left margin to move the label toward the right.
4. Select OK to save the changes to the label.
5. Print another label to verify the proper print position.
Printing discs with serialized labels
When printing multiple discs with serialized labels, the Detect Media Change option in the Printer
Driver Properties must be enabled manually. This is required for standalone printing.
 Note: If the printer is being used with a Rimage Producer system, this option must be
disabled.
1. Navigate to printing preferences.
2. Select the Device Settings tab.
3. Set the Detect Media Change option:
• If the PrismPlus is a standalone printer, set to Yes.
• If the PrismPlus is attached to an autoloader, set to No.
4. Select OK.