Rimage CDPR11

Rimage PrismPlus!

14 110635_G

d. To close the tray and start the cleaning cycle, press the Operator button. When the

cleaning cycle is complete, the tray opens.

e. If necessary, repeat step d.

f. Remove the cleaning pad with attached disc.

g. Using a cotton swab soaked in the cleaning solution, clean the front two ribbon guides.

4. Prepare the PrismPlus for use.

a. Power off the PrismPlus.

b. Reinstall the ribbon.

c. Replace the top cover.

 Note: If the printing pad on the tray becomes wet, allow the printing pad to completely dry

before using the PrismPlus.

d. Power on the PrismPlus.

Cleaning the printhead – alternate method

If a cleaning pad is not available, use the following cleaning procedure.

1. Prepare the PrismPlus.

a. Power on the PrismPlus.

b. To open the printer tray, press the Operator button.

c. Power down the PrismPlus.

d. Remove the top cover.

e. Remove the ribbon. Refer to Changing the print ribbon on page 15.

2. Clean the printhead.

- Important! Do not remove the printhead.

a. Lightly soak a in isopropyl alcohol.

cotton swab

b. Insert the cotton swab in the drawer opening and lift the swab upward as you run the

swab against the printhead elements.

3. nthead dries, prepare the PrismPlus for use. After the alcohol on the pri

a. Replace the ribbon.

b. Replace the top cover.

c. Power on the PrismPlus.

Contents

Main Page Page Rimage PrismPlus! Support information US, Asia/Pacific, Mexico/Latin America Europe Contents Identify the parts of the PrismPlus ................................................. 2 Operate the PrismPlus..................................................................... 5 Maintain the PrismPlus.................................................................. 13 Learn more...................................................................................... 18 Page Introduction Introduction Operating system requirements Media requirements Ribbon requirements Ribbon Color Part Number Number of Discs Printed Identify the parts of the PrismPlus Front view Control panel Identify the parts of the PrismPlus Operator button LED indicators Image Name Functionality Page Operate the PrismPlus Setting up a standalone PrismPlus Connecting the cables Installing the software Installing the printer driver Note: The Double Print feature allows you to print the same label twice on the disc. Powering on the printer Loading the discs - Important! Place the disc with the recording side facing down. The recording side has a Selecting the printing preferences Navigating to printing properties Setting color options Printing in monocolor Printing in color Setting the print quality Centering the image on the disc Printing discs with serialized labels Note: If the printer is being used with a Rimage Producer system, this option must be Maintain the PrismPlus General cleaning Cleaning the exterior Cleaning the printhead Cleaning the printhead alternate method - Important! Do not remove the printhead. Replace consumables Changing the print ribbon # Tip: If ribbons are stored in an environment much different from that of the printer, allow - Important! Do not roll past the - Important! Do not roll the STOP - Wind Leader Onto Take-up Core Stopping here Rimage PrismPlus! Learn more PrismPlus printer specifications Item Description Technical support and product updates - Important! Register your PrismPlus online or complete and return the registration card so n Warning! According to ANSI (American National Standards Institute) standards, a warning is p e this guideline could result in loss or damage to the n p p y p ace or store the printer in a location where children may reach it. Severe p Caution! Allow sufficient free space for opening the printer tray. Do not touch the printer tray C Learn more Rimage PrismPlus!TM Limited 6 Month Warranty. 110635_G 21