Introduction
The Ringdale IP Router is a local two port Ethernet IP router which enables IP packets to be routed from one Network/Subnet to another on your Local or Wide Area Network, and even across the Internet if required.
The IP Router is simple to install and can be configured and remotely managed using the PeripheralVision® software provided.
Use PeripheralVision® to create a routing table which directs the IP packets straight to the required IP Address, giving greater control over the operation of the network and aiding the speedy transmission of data.
Follow the instructions in this guide for quick installation and operation of your Ringdale IP Router.
Features
Remote management through Ringdale’s PeripheralVision® software
Supports multiple IP Addresses on the same network
Broadcast Forwarding
Integral all voltage power supply
Extremely low power consumption (3 watts)
Flash Upgradable
2
