Operating Instructions

FOR YOUR SAFETY READ BEFORE OPERATING

If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A.This appliance does not have a pilot. It is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

B.BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

OPERATING INSTRUCTIONS

1.STOP! Read the safety information above.

2.Set the thermostat to lowest setting.

3.Turn off all electric power to the appliance using the ON/OFF button.

4.This appliance is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

5.Locate the manual gas valve on the side of the heater. Turn the manual valve

clockwise to the full OFF position.

Manual Valve

CLOSE OPEN

6.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell

gas, STOP! Follow “B” in the safety information above. If you don,t smell gas, go to the next step.

7.Turn the manual gas valve counterclockwise to the

full ON position.

8.Turn on all electric power to the appliance using the ON/OFF button.

9.Set the thermostat to desired setting.

10.Open a hot water tap. If the appliance will not operate, follow the instructions “To Turn Off Gas To Appliance” and call your service technician or gas supplier. See manual for additional information.

TO TURN OFF GAS TO APPLIANCE

1.Turn off all electric power to the appliance using the ON/OFF button.

2.Set the thermostat to lowest setting.

3.Locate the manual gas valve on the side of the heater. Turn the manual valve clockwise to the full

OFF position.

32

VA Series Outdoor LS Manual

Page 31 Page 33
Page 32
Image 32
Rinnai R63LSE2 installation manual Operating Instructions, For Your Safety Read Before Operating
Page 31 Page 33

R63LSE2 specifications

The Rinnai R63LSE2 is a highly efficient and compact tankless water heater that offers an innovative solution for residential hot water needs. Designed with user convenience in mind, this model stands out for its performance, energy efficiency, and advanced technologies.

One of the main features of the R63LSE2 is its impressive flow rate, delivering up to 6.3 gallons per minute (GPM) of hot water. This capability allows households to enjoy simultaneous use of multiple fixtures, such as showers, sinks, and washing machines, without experiencing a drop in water temperature. This versatility makes the R63LSE2 an ideal choice for large families or homes with a high demand for hot water.

A key characteristic of the Rinnai R63LSE2 is its energy efficiency. It boasts a high Energy Factor (EF) rating, which translates to lower energy bills and reduced environmental impact. The unit utilizes an innovative heating technology that heats water on demand, eliminating the need for a storage tank. This approach not only conserves energy but also ensures a continuous supply of hot water.

In terms of technology, the R63LSE2 features advanced remote control capabilities, allowing users to monitor and adjust settings from anywhere in the home. This add-on capability enhances user experience and provides a level of convenience that is increasingly sought after in modern appliances. Additionally, the unit is equipped with state-of-the-art safety features, including a flame failure device, overheating protection, and a temperature control system, ensuring peace of mind during operation.

The Rinnai R63LSE2 is designed for easy installation and maintenance. Its compact size means it can be installed in various locations, including utility closets, garages, or even outdoor spaces, maximizing flexibility for homeowners. Furthermore, Rinnai provides comprehensive customer support and warranty options, ensuring assistance and reliability for users.

With a stylish design and durable construction, the R63LSE2 not only serves as a functional appliance but also complements the aesthetics of contemporary home designs. It represents a perfect combination of innovation, efficiency, and reliability for those seeking an effective water heating solution. Overall, the Rinnai R63LSE2 is an exceptional choice for anyone looking to upgrade their hot water system.
Top Page Image Contents