the instructions
Flue is not designed to be positioned under floor, or below the level of the heater. | |
Flue terminal must be kept clear of obstructions and plants because the combustion |
|
gases and vapour come out from flue terminal. |
|
Flue terminal must be kept clear of bags or empty cans so it does not get blocked. |
|
gas type and pressure are compatible with the appliance.
Diagram on the right shows minimum
clearances and distances from obstructions. Flue fittings must be positioned away from flammable materials and obstructions that
effect surrounding airflow.
Install flue fittings at an angle of 2 degrees from the surface.
| |
600mm | |
| |
| |
300mm | |
|
9 | 10 |
|