Switching between Flash Memory Cards and a CD

DISC SETUP

This page is used to set various CD-RW functions for burning (writing) a CD.

ERASE CD-RWis used to erase a CD-RW before burning.

MODE SELECT has three op- tions.

WRITE MODE – burns to the CD.

TEST MODE – simulates a burn to the CD but does not actually perform an actual burn.

VERIFY MODE – burns to the CD and then verifies the data.

Switching between Flash Memory Cards and a CD

There a two ways to switch between a Flash Memory Card and a CD.

Using the Remote Control

This method is normally used when the QuattroDrive is connected to a TV or a projector.

Press the MODE button on the remote control. The GOTO button can also be used.

MODE OSD ANGLE TITLE

MODE

PAUSE PBC ZOOM AUDIO

The OSD will display FLASH CARD or DISC LOADING in the top left corner.

Using the Buttons on the QuattroDrive

This method is used for when you are on the road and a TV or projector is not available.

1.Press the STOP/ESC button on the QuattroDrive to bring up the menu in the LCD panel.

2.Press the PREV and NEXT buttons to switch between CArd, dISC, COPY or ErASE.

3.Press the ENTER/PLAY button to switch to the

desired media storage type, copy files to a CD-R/W or erasing a CD-RW. See Writing (Burn- ing) Files to a CD on page 26 for details on the copy and erase functions.

18